Ip Multicast Routing Configuration Guide, Cisco Ios Xe Release 3Se (Catalyst 3650 Switches - Cisco Catalyst 3650 Configuration Manual

Displaying System and Network Statistics
Command
show ip igmp ssm-mapping [ hostname/IP address
]
show ip igmp static-group {class-map [ interface
[ type ] ]
show ip igmp vrf
show ip mfib [ type number ]
show ip mrib { client | route | vrf }
show ip mrm { interface | manager | status-report
}
show ip mroute [group-name | group-address]
[source] [ count | interface | proxy | pruned |
summary | verbose]
show ip msdp { count | peer | rpf-peer | sa-cache |
summary | vrf }
show ip multicast [ interface | limit | mpls |
redundancy | vrf ]
show ip pim interface [type number] [count | detail
| df | stats ]
show ip pim all-vrfs { tunnel }
show ip pim autorp
show ip pim boundary [ type number ]
show ip pim bsr-router
show ip pim interface [ type number ]
show ip pim mdt [ bgp ]
show ip pim neighbor [type number]
show ip pim rp [group-name | group-address]

IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)

270
Configuring IP Multicast Routing
Purpose
Displays IGMP SSM mapping information.
Displays static group information.
Displays the selected VPN Routing/Forwarding
instance by name.
Displays the IP multicast forwarding information
base.
Displays the multicast routing information base.
Displays the IP multicast routing monitor information.
Displays the contents of the IP multicast routing table.
Displays the Multicast Source Discovery Protocol
(MSDP) information.
Displays global multicast information.
Displays information about interfaces configured for
PIM. This command is available in all software
images.
Display all VRFs.
Display global auto-RP information.
Displays boundary information.
Display bootstrap router information (version 2).
Displays PIM interface information.
Displays multicast tunnel information.
Lists the PIM neighbors discovered by the device.
This command is available in all software images.
Displays the RP routers associated with a
sparse-mode multicast group. This command is
available in all software images.
OL-29890-01