Monitoring Service Discovery Gateway; Configuration Examples - Cisco Catalyst 3650 Configuration Manual

Configuring the Service Discovery Gateway

Monitoring Service Discovery Gateway

Table 24: Monitoring Service Discovery Gateway
Command
show mdns requests [detail | name record-name|
type record-type [ name record-name]]
show mdns cache [interface type number | name
record-name [type record-type]| type record-type]
show mdns statistics {all | service-list list-name |
service-policy {all | interface type number }}

Configuration Examples

Example: Specify Alternative Source Interface for Outgoing mDNS Packets
The following example displays how to specify an alternate source interface for outgoing mDNS packets, so
its IP address can be used when there is none configured on the outgoing interface.
Device(config)# service-routing mdns-sd
Device(config-mdns)# source-interface if-name
Related Topics
Enabling mDNS Gateway and Redistributing Services (CLI), on page 283
Service Discovery Gateway , on page 277
Filtering, on page 278
Example: Redistribute Service Announcements
The following example displays how to redistribute service announcements received on one interface over
all the interfaces or over a specific interface.
Device(config)# service-routing mdns-sd
Device(config-mdns)# Redistribute mdns-sd if-name
Related Topics
Enabling mDNS Gateway and Redistributing Services (CLI), on page 283
Service Discovery Gateway , on page 277
OL-29890-01
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
Monitoring Service Discovery Gateway
Purpose
This command displays information for outstanding
mDNS requests, including record name and record
type information.
This command displays mDNS cache information.
This command displays mDNS statistics.
287