How To Configure The Service Discovery Gateway - Cisco Catalyst 3650 Configuration Manual

Configuring the Service Discovery Gateway
Related Topics
Configuring the Service List (CLI), on page 279
Example: Creating a Service-List, Applying a Filter and Configuring Parameters, on page 288
Enabling mDNS Gateway and Redistributing Services (CLI), on page 283
Example: Specify Alternative Source Interface for Outgoing mDNS Packets, on page 287
Example: Redistribute Service Announcements, on page 287
Example: Disable Bridging of mDNS Packets to Wireless Clients, on page 288
Example: Enabling mDNS Gateway and Redistributing Services, on page 288
Example: Global mDNS Configuration, on page 289
Example: Interface mDNS Configuration, on page 289

How to Configure the Service Discovery Gateway

Configuring the Service List (CLI)
This procedure describes how to create a service list, apply a filter for the service list, and configure parameters
for the service list name.
SUMMARY STEPS
1. enable
2. configure terminal
3. service-list mdns-sd service-list-name {deny sequence-number | permit sequence-number | query}
4. match message-type {announcement | any | query}
5. match service-instance { LINE }
6. match service-type {LINE }
7. end
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
OL-29890-01
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
How to Configure the Service Discovery Gateway
279