Configuration Example For An Erspan Destination Session; Additional References; Related Documents; C H A P T E - Cisco Nexus 3548 series Configuration Manual

Configuring ERSPAN

Configuration Example for an ERSPAN Destination Session

The following example shows how to configure an ERSPAN destination session:
switch# config t
switch(config)# interface e14/29
switch(config-if)# no shut
switch(config-if)# switchport
switch(config-if)# switchport monitor
switch(config-if)# exit
switch(config)# monitor session 2 type erspan-destination
switch(config-erspan-dst)# source ip 9.1.1.2
switch(config-erspan-dst)# destination interface e14/29
switch(config-erspan-src)# erspan-id 1
switch(config-erspan-dst)# no shut
switch(config-erspan-dst)# exit
switch(config)# show monitor session 2

Additional References

Related Documents

Related Topic
ERSPAN commands: complete command syntax,
command modes, command history, defaults, usage
guidelines, and examples
Cisco Nexus 3548 Switch NX-OS System Management Configuration Guide, Release 7.x
Configuration Example for an ERSPAN Destination Session
Document Title
Cisco Nexus NX-OS System Management Command
Reference for your platform.
165