Configuring Ip Multicast Vlan For Wlan (Cli) - Cisco Catalyst 3650 Configuration Manual

Configuring Wireless Multicast
Command or Action
Step 5
end
Example:
Device(config)# end

Configuring IP Multicast VLAN for WLAN (CLI)

SUMMARY STEPS
1. enable
2. configure terminal
3. wlan wlan_name
4. shutdown
5. ip multicast vlan {vlan_name vlan_id}
6. no shutdown
7. end
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Device> enable
Step 2
configure terminal
Example:
Device# configure terminal
Step 3 wlan wlan_name
Example:
Device(config)# wlan test 1
Step 4 shutdown
Example:
Device(config-wlan)# shutdown
OL-29890-01
Purpose
Exits the configuration mode. Alternatively, press Ctrl-Z to exit
the configuration mode.
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
Configuring IP Multicast VLAN for WLAN (CLI)
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global command mode.
Enters the configuration mode to configure various
parameters in the WLAN.
Disables WLAN.
225