Displaying System And Network Statistics - Cisco Catalyst 3650 Configuration Manual

Configuring IP Multicast Routing
Command
clear ip msdp { peer | sa-cache | statistics |
vrf }
clear ip multicast { limit | redundancy
statistics }
clear ip pim { df [ int | rp rp address ] |
interface | rp-mapping [rp address] | vrf vpn
name { df | interface | rp-mapping }
clear ip sap [group-address | "session-name"]

Displaying System and Network Statistics

You can display specific statistics, such as the contents of IP routing tables, caches, and databases.
This release does not support per-route statistics.
Note
You can display information to learn resource usage and solve network problems. You can also display
information about node reachability and discover the routing path that packets of your device are taking
through the network.
You can use any of the privileged EXEC commands in the following table to display various routing statistics.
Table 22: Commands for Displaying System and Network Statistics
Command
ping [group-name | group-address]
show ip igmp filter
show ip igmp groups [type-number | detail ]
show ip igmp interface [type number]
show ip igmp membership [ name/group address |
all | tracked ]
show ip igmp profile [ profile_number]
OL-29890-01
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
Displaying System and Network Statistics
Purpose
Clears the Multicast Source Discovery Protocol (MSDP)
cache.
Clears the IP multicast information.
Clears the PIM cache.
Deletes the Session Directory Protocol Version 2 cache or
an sdr cache entry.
Purpose
Sends an ICMP Echo Request to a multicast group
address.
Displays IGMP filter information.
Displays the multicast groups that are directly
connected to the device and that were learned through
IGMP.
Displays multicast-related information about an
interface.
Displays IGMP membership information for
forwarding.
Displays IGMP profile information.
269