Example: Configuring Msdp Mesh Groups - Cisco Catalyst 3650 Configuration Manual

Example: Configuring MSDP Mesh Groups

Device C Configuration
ip msdp default-peer 10.1.1.1 prefix-list site-b ge 32
ip prefix-list site-b permit 10.0.0.0/8
Related Topics
Configuring a Default MSDP Peer, on page 192
Default MSDP Peers, on page 179
Example: Configuring MSDP Mesh Groups
The following example shows how to configure three devices to be fully meshed members of an MSDP mesh
group:
Device A Configuration
ip msdp peer 10.2.2.2
ip msdp peer 10.3.3.3
ip msdp mesh-group test-mesh-group 10.2.2.2
ip msdp mesh-group test-mesh-group 10.3.3.3
Device B Configuration
ip msdp peer 10.1.1.1
ip msdp peer 10.3.3.3
ip msdp mesh-group test-mesh-group 10.1.1.1
ip msdp mesh-group test-mesh-group 10.3.3.3
Device C Configuration
ip msdp peer 10.1.1.1
ip msdp peer 10.2.2.2
ip msdp mesh-group test-mesh-group 10.1.1.1
ip msdp mesh-group test-mesh-group 10.2.2.2
Related Topics
Configuring an MSDP Mesh Group, on page 193
MSDP Mesh Groups, on page 180
Where to Go Next for MSDP
You can configure the following:
• IGMP
• PIM
• SSM
• IP Multicast Routing
• Service Discovery Gateway
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
212
Configuring MSDP
OL-29890-01