Adjusting The Msdp Connection-Retry Interval; Configuring A Default Msdp Peer - Cisco Catalyst 3650 Configuration Manual

Adjusting the MSDP Connection-Retry Interval

Adjusting the MSDP Connection-Retry Interval
Perform this optional task to adjust the interval at which MSDP peers will wait after peering sessions are reset
before attempting to reestablish the peering sessions. In network environments where fast recovery of SA
messages is required, such as in trading floor network environments, you may want to decrease the
connection-retry interval to a time value less than the default value of 30 seconds.
SUMMARY STEPS
1. enable
2. configure terminal
3. ip msdp timer connection-retry-interval
4. exit
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Device> enable
Step 2
configure terminal
Example:
Device# configure terminal
Step 3 ip msdp timer connection-retry-interval
Example:
Device# ip msdp timer 45
Step 4
exit
Example:
Device(config)# exit

Configuring a Default MSDP Peer

Perform this optional task to configure a default MSDP peer.
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
192
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Configures the interval at which MSDP peers will wait after
peering sessions are reset before attempting to reestablish the
peering sessions.
Exits global configuration mode and returns to privileged EXEC
mode.
Configuring MSDP
OL-29890-01