Configuring Pim; Finding Feature Information; Prerequisites For Configuring Pim; Ip Multicast Routing Configuration Guide, Cisco Ios Xe Release 3Se (Catalyst 3650 Switches - Cisco Catalyst 3650 Configuration Manual

Configuring PIM

•
•
•
•
•
•
•
•
•
•
•
•
•

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.

Prerequisites for Configuring PIM

The following are the prerequisites for configuring PIM and PIM stub routing:
OL-29890-01
Finding Feature Information, page 111
Prerequisites for Configuring PIM, page 111
Restrictions for Configuring PIM, page 112
Restrictions for Configuring Auto-RP, page 112
Restrictions for Configuring Auto-RP and BSR, page 113
Information About PIM, page 113
How to Configure PIM, page 124
Monitoring PIM , page 155
Troubleshooting PIMv1 and PIMv2 Interoperability Problems, page 156
Configuration Examples for PIM, page 156
Where to Go Next for PIM , page 160
Additional References, page 160
Feature History and Information for PIM, page 162

IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)

6
C H A P T E R
111