Displaying System And Network Statistics - Cisco 3032 Software Configuration Manual

Monitoring and Maintaining IP Multicast Routing
Table 44-5
Command
clear ip igmp group [group-name |
group-address | interface]
clear ip mroute {* | group [source]}
clear ip pim auto-rp rp-address
clear ip sdr [group-address | "session-name"]

Displaying System and Network Statistics

You can display specific statistics, such as the contents of IP routing tables, caches, and databases.
This release does not support per-route statistics.
Note
You can display information to learn resource usage and solve network problems. You can also display
information about node reachability and discover the routing path that packets of your device are taking
through the network.
You can use any of the privileged EXEC commands in
Table 44-6
Command
ping [group-name | group-address]
show ip dvmrp route [ip-address]
show ip igmp groups [group-name |
group-address | type number]
show ip igmp interface [type number]
show ip mcache [group [source]]
show ip mpacket [source-address | name]
[group-address | name] [detail]
show ip mroute [group-name | group-address]
[source] [summary] [count] [active kbps]
show ip pim interface [type number] [count]
[detail]
show ip pim neighbor [type number]
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
44-62
Commands for Clearing Caches, Tables, and Databases (continued)
Commands for Displaying System and Network Statistics
Chapter 44 Configuring IP Multicast Routing
Purpose
Delete entries from the IGMP cache.
Delete entries from the IP multicast routing table.
Clear the auto-RP cache.
Delete the Session Directory Protocol Version 2
cache or an sdr cache entry.
Table 44-6 to display various routing statistics:
Purpose
Send an ICMP Echo Request to a multicast group
address.
Display the entries in the DVMRP routing table.
Display the multicast groups that are directly
connected to the switch and that were learned
through IGMP.
Display multicast-related information about an
interface.
Display the contents of the IP fast-switching
cache.
Display the contents of the circular cache-header
buffer.
Display the contents of the IP multicast routing
table.
Display information about interfaces configured
for PIM. This command is available in all software
images.
List the PIM neighbors discovered by the switch.
This command is available in all software images.
OL-12247-04