Configuring Msdp Mesh Groups - Cisco Nexus 7000 Series Configuration Manual

Nx-os multicast routing
Hide thumbs Also See for Nexus 7000 Series:
Table of Contents

Advertisement

Configuring MSDP
Step 3
Step 4

Configuring MSDP Mesh Groups

You can configure optional MDSP mesh groups in global configuration mode by specifying each peer in the
mesh. You can configure multiple mesh groups on the same router and multiple peers per mesh group.
Ensure that you have installed the Enterprise Services license and enabled PIM and MSDP.
Command or Action
Option
Description
Note
Maximum number of (S,
ip msdp
G) entries that the
group-limit
software creates for the
source
limit
specified prefix. The
source-prefix
software ignores groups
Example:
when the group limit is
exceeded and logs a
switch(config)#
ip msdp
violation. By default, no
group-limit 1000
group limit is defined.
source
192.168.1.0/24
Interval at which the
ip msdp
software transmits
sa-interval
Source-Active (SA)
seconds
messages. The range is
Example:
from 60 to 65,535
seconds. The default is 60
switch(config)#
ip msdp
seconds.
sa-interval 80
show ip msdp summary [vrf vrf-name |
known-vrf-name | all]
Example:
switch# show ip msdp summary
copy running-config startup-config
Example:
switch(config)# copy running-config
startup-config
Cisco Nexus 7000 Series NX-OS Multicast Routing Configuration Guide
Purpose
We
recommend
that you use a
loopback
interface for
the RP
address.
(Optional) Displays a summary of the MDSP
configuration.
(Optional) Saves configuration changes.
Configuring MSDP Mesh Groups
167

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents