3D Disto, Operation
6.5
Addition and
subtraction after
measurements
step-by-step
Addition and Subtraction
During and after the measurement you have the option to add or subtract selected
elements.
The following values can be added:
•
Horizontal distances
•
Tie distances
Area and Volume results can be added or subtracted by using the memory function
in the calculator.
1. Select element by fingertip, pen or
2. Press
or
for addition or subtraction. The corresponding symbol appears
in the status bar. Selected line or area is highlighted with black bullet symbol.
3. Select next element and press
close the sum and/or finish the adding/subtracting function.
/
.
or
for addition/subtraction again or
94
to