Icom IC-7610 Basic Manual page 56

8
SET MODE
Function (Continued)
» SET > Function
MENU
[SPEECH/LOCK] Switch
Selects action.
SPEECH
Lock Function
This function electronically locks
panel display* to prevent accidental changes.
* Keys and dials are also locked except for
, , and
KEY
PITCH POWER
SPEED
Memo Pad Quantity
Sets the number of memo pad channels.
MAIN DIAL Auto TS
Sets the Auto Tuning Step function for
When rapidly rotating
MAIN DIAL
automatically changes according to the rotation speed.
MAIN/SUB DIAL Select (USB DIAL–SUB Only)
Selects whether
MAIN DIAL
band frequency, or changes both the Main and Sub
band frequencies, depending on which band is
selected.
L This is convenient when using the optional RC-28
to change the Sub band frequency.
encoder
MAIN/SUB Tracking [MAIN/SUB] Switch
Assigns the Main and Sub band tracking function to
the key.
MAIN/SUB
MIC Up/Down Speed
Sets the response speed of [∫]/[√] on the supplied
microphone when holding them down.
Quick RIT/∂TX Clear
Selects the operation of
functions.
[NOTCH] Switch (SSB)
[NOTCH] Switch (AM)
Selects the notch function used in the SSB or AM
mode.
FILTER Screen MAIN/SUB Select
(Default: Auto (by FILTER, PBT Operation)
Selects whether or not to automatically switch the IF
filter or Twin PBT settings when Main and Sub bands
are switched between each other, while displaying the
FILTER screen.
(Default: SPEECH/LOCK)
(Default: MAIN DIAL)
or the
MAIN DIAL
AF RF/SQL
.
SPEECH
(Default: 5)
(Default: High)
MAIN DIAL
, the tuning step
(Default: MAIN/SUB)
changes only the Main
remote
(Default: OFF)
(Default: Fast)
(Default: OFF)
for the RIT and ∂TX
CLEAR
(Default: Auto/Manual)
(Default: Auto/Manual)
SSB/CW Synchronous Tuning
Turns the Displayed Frequency Shift function ON or
OFF.
This function automatically shifts the frequency to
match the CW pitch when the operating mode is
toggled between SSB and CW.
CW Normal Side
Selects the carrier point in the CW normal mode.
Screen Keyboard Type
, ,
Sets the keyboard entry type to Ten-Key or Full
Keyboard.
Screen Full Keyboard Layout
Select the on-screen keyboard layout between
English, German and French.
.
Screen Capture [POWER] Switch
Assigns the Screen Capture function to
Screen Capture Keyboard [Print Screen]
Assigns the Screen Capture function to the [Print
Screen] key on the USB keyboard.
Screen Capture Storage Media
Selects the SD card or USB flash drive to save screen
capture data.
Screen Capture File Type
Selects the file format for the Screen Capture function.
Calibration Marker
Turns the reference frequency calibration marker ON
or OFF.
REF Adjust
Adjusts the internal reference frequency.
NOTE: The default setting of "REF Adjust" may differ
slightly, depending on the transceiver's version.
8-4
(Default: OFF)
(Default: LSB)
(Default: Full Keyboard)
(Default: English)
(Default: OFF)
.
POWER
(Default: OFF)
(Default: SD Card)
(Default: PNG)
(Default: OFF)