Rear Panel - Icom IC-7610 Basic Manual

1
PANEL DESCRIPTION

Rear panel

q
!5
!4 !3
q DC POWER SOCKET [DC 13.8 V]
Connects to 13.8 V DC through the DC power
cable.
w TUNER CONTROL SOCKET [TUNER]
A ccepts the control cable from an optional
AH-4 or AH-740
automatic antenna tuner
e COOLING FAN
C ools the PA unit when necessary.
r GROUND TERMINAL [GND]
C onnects to ground to prevent electrical shocks,
TVI, BCI and other problems.
t ANTENNA CONNECTOR [ANT1]/[ANT2]
C onnects to a 50 Ω antenna. If you use the AH-4 or
AH-740, you must connect the antenna to [ANT1].
y ALC INPUT JACK [ALC]
C onnects to the ALC output jack of a non-Icom
linear amplifier.
u SEND CONTROL JACK [SEND]
C onnects to control transmit with non-Icom external
units.
i EXTERNAL SPEAKER JACK A/B [EXT-SP]
Accepts a 4 ~ 8 Ω external speaker.
o USB PORT [USB 1] (Type B)
Connects to a PC for remote control operations.
!0 USB PORT [USB 2] (Type B)
For digital data input or output.
!1 EXTERNAL DISPLAY CONNECTOR
[EXT-DISPLAY]
Connects to an external display monitor.
w e
.
r
!6 !7 !8 !9
!2 !1
!2 ETHERNET CONNECTOR [LAN]
Connects to a PC network through a LAN.
!3 TRANSVERTER CONNECTOR [X-VERTER]
Connects to an external transverter for input/output.
!4 REFERENCE SIGNAL INPUT [REF IN]
I nput for a 10 MHz reference signal through the
BNC connector.
!5 RECEIVE ANTENA [RX ANT–IN]/[RX ANT–OUT]
Connects to an external unit, such as preamplifier
or RF filter, using BNC connectors.
• This is located between the transmit/receive switching
circuit and receiver's RF stage.
!6 CI-V REMOTE CONTROL JACK [REMOTE]
Connects to a PC or other transceiver for remote
control.
!7 METER JACK [METER]
O utputs received signal strength, transmit output
power, VSWR, ALC, speech compression, V
levels for an external meter.
!8 EXTERNAL KEYPAD JACK [EXT KEYPAD]
(p. 13-4)
C onnects to an external keypad for direct voice
memory, memory keyer, RTTY memory or PSK
memory transmission.
!9 STRAIGHT KEY JACK [KEY]
C onnects to a straight key, paddle, or an external
electronic keyer with 6.35 mm (¼ in) stereo plug.
@0 ACC SOCKET [ACC1]/[ACC2]
C onnects to devices to control an external unit or to
control the transceiver.
1-3
t
@0
!0 o i
y
u
or I
d d