Icom IC-7610 Basic Manual page 14

1
PANEL DESCRIPTION
Touch screen display (Continued)
@4
@3
@2
@1
@1 VFO/MEMORY ICON (p. 3-1)
" VFO" is displayed when the VFO mode is selected,
and the memory number is displayed when a
Memory channel is selected.
@2 TX STATUS INDICATOR (p. 3-4, 3-9)
Displays the transmit status of the displayed
frequency.
• is displayed while the displayed frequency is within
the amateur band range.
• (Red background) is displayed while transmitting.
• (With a border of short dashes) is displayed when
the selected frequency is outside of the amateur band
frequency.
• (Grayed out) is displayed while the transmitter is
inhibited.
@3 RF GAIN INDICATOR (p. 3-7)
Displayed when
AF
counterclockwise from the 11 o'clock position. The
indicator shows that the RF gain is reduced.
@4 OVF ICON (p. 3-7)
" OVF" is displayed when an excessively strong
signal is received.
@5 METER INDICATOR (p. 3-7)
D isplays the S, I , Po, SWR, COMP, ALC and V
d
meters.
@6 MODE INDICATOR (p. 3-3)
Displays the selected operating mode.
@7 IF FILTER INDICATOR (p. 4-3, 4-4)
D isplays the selected IF filter.
@8 QUICK TUNING ICON (p. 3-4)
D isplayed when the quick Tuning Step function is
ON.
@9 AUTO TUNE INDICATOR (p. 4-8)
D isplays "AUTOTUNE" when the Auto Tuning
function is ON.
@5 @6 @7 @8
#9 #8 #7
(outer) is set
RF/SQL
@9 #0 #1 #2 #3 #4 @1 @4
#6 #5 $1 $0 #9
#0 SPLIT ICON (p. 4-9)
Displayed when the Split function is ON.
#1 DUALWATCH ICON (p. 3-2)
Displayed when using Dualwatch.
#2 SHIFT FREQUENCY READOUT (p. 4-1)
Displays the shift offset for the RIT or TX
functions, while these functions are ON.
#3 RIT ICON (p. 4-1)
Displayed when the RIT function is ON.
#4 TX ICON
Displayed when the TX function is ON.
#5 1/4 TUNING STEP INDICATOR (p. 3-5)
D isplayed while the 1/4 Tuning Step function is ON.
#6 M1~M8/T1~T8
• D isplays "M1"~"M8" while using the Memory Keyer
function is used.
• D isplays "T1"~"T8" while using the Voice TX memory
function.
#7 MEMORY CHANNEL/VFO READOUT (p. 3-1)
Displays the selected memory channel contents in
the VFO mode, and displays the VFO contents in
the Memory mode.
d
#8 LMT ICON
D isplayed if the power amplifier temperature
becomes extremely high and the protection function
is activated after transmitting continuously for long
periods of time.
#9 SELECT MEMORY CHANNEL ICON
Indicates that the displayed memory channel is
assigned as a Select memory channel (★1~★3).
$0 PLAY ICON
Displayed while playing the recorded voice audio.
$1 DIAL LOCK INDICATOR (p. 3-6)
Displayed while the Lock function is ON.
1-5
@3 @2 @6 @7 @8 @9 @5
#8 #7 #6 #5