Time Set; Sd Card - Icom IC-7610 Basic Manual

Screen Saver
Sets the Screen Saver function.
This function activates and automatically turns OFF
the screen when no operation is performed for the
preset period of time.
External Display
Select "ON" when using an external display.
External Display Resolution
Select the screen resolution of the external display.
Opening Message
Selects whether or not to display the opening
message at power ON.
My Call
Displays text as the opening message, up to 10
characters.
Power ON Check
Selects whether or not to display the RF Power level
at power ON.
Display Language
Sets the display language.

Time Set

» SET > Time Set > Date/Time
MENU
Date
Sets the date (Year/Month/Day).
(The day of the week is automatically set.)
Time
Sets the current time.
(The time is displayed in the 24 hour format.)
NOTE: The backup battery for the internal clock
The IC-7610 has a rechargeable Lithium battery to backup
the internal clock. If you connect the transceiver to a
power source, the battery is charged and it keeps the
correct clock setting. However, if you do not connect the
transceiver to a power source for a long period of time, the
battery will discharge. In that case, the transceiver resets
the internal clock.
If you do not use the transceiver for a long period of time,
we recommend that you connect the transceiver to a
power source at least once a month. The charging period
is two days whether the transceiver's power is ON or OFF.
(Default: 60min) <<NTP TIME SYNC>>
Synchronizes the internal clock with the time
management server.
L To use this function, you need an Internet connection
NTP Function
(Default: OFF)
Automatically obtains the current time from the NTP
server.
(Default: 800x480)
NTP Server Address
Sets NTP server address.
(Default: ON)
MENU
UTC Offset
(Default: —)
Sets the UTC offset time.
CLOCK2 Function
(Default: ON)
Displays the second clock on the screen.
CLOCK2 UTC Offset
Sets the time offset for Clock 2.
(Default: English)
CLOCK2 Name
Sets the name of up to 3 characters for Clock 2.
MENU
Load Setting
Selects the saved data file to load.
Save Setting
Saves the setting data onto an SD card.
SD Card Info
Displays the SD card capacity and the time remaining
for voice recording.
Screen Capture View
Displays the selected screen capture.
Firmware Update
Displays the Firmware Update mode.
8-9
and default gateway settings.
» SET > Time Set

SD Card

» SET > SD Card
8
SET MODE
(Default: ON)
(Default: time.nist.gov)
(Default: ± 0:00)
(Default: ON)
(Default: ± 0:00)
(Default: UTC)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21