Icom IC-7610 Basic Manual page 11

Front panel (Continued)
!9 EXIT KEY
EXIT
E xits a setting screen or returns to the previous
screen.
@0 VOICE MEMORY RECORD KEY
Saves the previously received signal for the preset
time period set in REC Time, using the Instant
Replay function, or starts recording a QSO audio
onto an SD card.
@1 VOICE MEMORY PLAY BACK KEY
Plays back the last 5 seconds of the Instant Replay
memory, or all of the Instant Replay memory.
@2
@3
@4
@5
@6
@2 MULTI-FUNCTION CONTROL
Displays the Multi-function menu for various
adjustments, or selects an item.
@3 SPLIT KEY (p. 4-9)
SPLIT
Turns the Split function ON or OFF.
@4 DUALWATCH KEY
DUAL-W
Turns the Dualwatch function ON or OFF.
@5 GENERAL COVERAGE BAND KEY
Selects the general coverage band.
@6 TRANSMIT FREQUENCY CHECK KEY
(p. 4-1, 4-9, 4-10)
E nables you to monitor the transmit frequency while
holding it down in the Split mode.
@7 TENSION ADJUSTER
A djusts the friction of
MAIN DIAL
@8 MAIN DIAL (p. 3-4)
MAIN DIAL
Changes the operating frequency.
REC
PLAY
$0
#9
#8
#7
#6
#5
#4
#3
#2
#1
@7 @8 @9 #0
(p. 1-6)
MULTI
(p. 3-2)
GENE
XFC
.
@9 SPEECH/LOCK KEY
• A nnounces the operating frequency and mode by
pushing this key.
• Electronically locks
this key for 1 second.
#0 MAIN/SUB CHANGE KEY
T oggles the frequency, mode and selected memory
channel between the Main and Sub band.
#1 RIT/ TX CONTROL
S hifts the receive or transmit frequency up to
±9.99 kHz without changing the transmit or receive
frequency.
#2 TX KEY
TX
Turns the TX function ON or OFF.
#3 CLEAR KEY
CLEAR
Clears the RIT or TX shift frequency.
#4 RIT KEY (p. 4-1)
RIT
Turns the Receiver Incremental Tuning (RIT)
function ON or OFF.
#5 KEY SPEED
KEY
SPEED
A djusts the internal electronic CW keyer speed.
CW PITCH
KEY PITCH
SPEED
Shifts the received CW audio pitch and the CW
side tone pitch without changing the operating
frequency.
#6 MAIN/SUB ACCESS KEY
S elects the Main or Sub band frequency readout.
• T he selected band's frequency is displayed clearly
whereas the non-selected band's frequency is
displayed in gray.
#7 AUDIO PEAK FILTER/
TWIN PEAK FILTER KEY
I n the CW mode, turns the Audio Peak Filter ON or
OFF, and in the RTTY mode, turns the Twin Peak
Filter ON or OFF.
#8 FILTER KEY
FILTER
S elects one of three IF filters.
#9 TWIN PASSBAND TUNING CONTROL
(p. 4-3)
A djusts the IF filter's passband width.
$0 KEYPAD ~
1.8 50
S elects the operating band by pushing once, or call
up other stacked frequencies by pushing the same
key several times.
1-2
PANEL DESCRIPTION
SPEECH
by holding down
MAIN DIAL
(p. 3-2)
CHANGE
(p. 4-1)
RIT/ TX
CONTROL (p. 4-11)
PITCH
CONTROL (p. 4-10)
(p. 3-2)
MAIN/SUB
(p. 4-12)
APF/TPF
(p. 4-4)
TWIN PBT
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
CLR
21