Examples; Example: Legacy Monitoring Configuration - Cisco cBR 8 Configuration Manual

Creating and Configuring an Enforce-Rule
Step 8
Step 9
Step 10

Examples

This section provides command-line interface (CLI) examples, including the help feature for some of the
enforce-rule commands.

Example: Legacy Monitoring Configuration

The following example shows a sample configuration of an enforce-rule for legacy monitoring:
Router(config)# cable qos enforce-rule test
Router(enforce-rule)# monitoring-basics ?
legacy
peak-offpeak
Router(enforce-rule)# monitoring-basics legacy ?
docsis10
docsis11
Router(enforce-rule)# monitoring-basics legacy docsis11
Router(enforce-rule)# service-class ?
enforced
registered
Router(enforce-rule)# service-class registered ?
WORD
Router(enforce-rule)# service-class registered BEUS
Router(enforce-rule)# service-class enforced test
Router(enforce-rule)# duration ?
<10-10080>
Router(enforce-rule)# duration 10 ?
avg-rate
Router(enforce-rule)# duration 10 avg-rate ?
<1-4294967>
Router(enforce-rule)# duration 10 avg-rate 2 ?
sample-interval
Router(enforce-rule)# duration 10 avg-rate 2 sample-interval ?
<1-30>
Cisco cBR Series Converged Broadband Routers Quality of Services Configuration Guide for Cisco IOS XE
Fuji 16.7.x
128
Command or Action
avg-rate 3 sample-interval 10 penalty 120
upstream enforce
penalty-period minutes [time-of-day
{hour|hour:minutes}] [monitoring-on]
Example:
Router(enforce-rule)# penalty-period 10
enabled
Example:
Router(enforce-rule)# enabled
end
Example:
Router(enforce-rule)# end
Enable legacy (same average rate for all day)
Enable peak-offpeak monitoring
Enforce-rule will map to docsis 1.0 modems
Enforce-rule will map to docsis 1.1 modems
Enforced service class
Registered service class
Registered service class name
Duration in minutes
Average rate for the duration in kbits/sec
average rate in kbits/sec
Rate of sampling in Minutes
Sampling rate in Minutes
Subscriber Traffic Management
Purpose
(Optional) Specifies the period for which an
enforced QoS profile should be in effect for
subscribers who violate their registered QoS
profiles.
(Optional) Activates the enforce-rule and begins
subscriber traffic management.
Exits enforce-rule configuration mode and returns
to privileged EXEC mode.
monitoring