Software Bundle Installation - Cisco IR829 Hardware Installation Manual

Cisco IR829 Differences
IR800#show platform led system
System LED: amber, blinking
Summary of the LED status providers:
------------------------------
GigabitEthernet5
Note There may be a lag time between the LED indication on the router and what the show led commands
return.

Software Bundle Installation

The Cisco IR829 ships with the latest software available with the configuration that was ordered. There
should be no reason to have to upgrade unless a failure occurs or you have been instructed to reload all
software. Should the need arise, the following steps will assist in performing a bundle installation.
Overview:
1.
2.
3.
4.
Example:
Step 1 Copy the bundle from a TFTP server to your router.
IR800#copy tftp flash
Address or name of remote host [223.255.254.254]? your ip address here
Source filename [path to file/ir800-universalk9-bundle.SSA.156-0.3.T]?
Destination filename [ir800-universalk9-bundle.SSA.156-0.3.T]?
Accessing tftp://223.255.254.254/tachen/ir800-universalk9-bundle.SSA.156-0.3.T...
Loading tachen/ir800-universalk9-bundle.SSA.156-0.3.T from 223.255.254.254 (via Vlan1): !
*Jun 25 18:28:45.685: %ARP-4-NULL_SRC_MAC: NULL MAC address from 99.99.0.1 on
wl0!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!
[OK - 143536651 bytes]
143536651 bytes copied in 774.390 secs (185354 bytes/sec)
The bundle download is complete, and now needs to be installed. Perform the
Step 2
< bundle iOS image name>
IR800#bundle install flash:ir800-universalk9-bundle.SSA.156-0.3.T
Installing bundle image:
/ir800-universalk9-bundle.SSA.156-0.3.T...................................................
........................................
updating Hypervisor image...
Sending file modes: C0444 23753557 ir800-hv.srp.SPA.0.28
Cisco IR829 Integrated Services Router
4-6
Client
Download the bundle to flash memory from a TFTP server.
Install the bundle from the Command Line Interface
Save the configuration and reload the router to use the new image.
Download the 4G firmware upgrade.
command.
SRP md5 verification passed!
Type Status
-------- --------
critical OK
Chapter 4 Initial Configuration
bundle install flash: