Tacacs-Server Key; Tacacs-Server Timeout - Planet WGSD-1022 User Manual

Example
The following example specifies a TACACS+ host.
Console (config)# tacacs-server host 172.16.1.1

5.25.2 tacacs-server key

The tacacs-server key command in global configuration mode sets the authentication encryption key used for all TACACS+
communications between the device and the TACACS+ daemon. To disable the key, use the no form of this command.
Syntax
tacacs-server key key-string
no tacacs-server key
key-string — Specifies the authentication and encryption key for all TACAS communications between the router and the
TACACS server. This key must match the encryption used on the TACACS daemon. (Range: Up to 160 characters)
Default Configuration
Empty string
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example sets the authentication encryption key.
Console (config)# tacacs-server key abc-s

5.25.3 tacacs-server timeout

The tacacs-server timeout command in global configuration mode sets the timeout value. To restore the default, use the no
form of this command.
Syntax
tacacs-server timeout timeout
no tacacs-server timeout
User's Manual of WGSD-1022/WGSD-8000
- 334 –