Reboot - Planet WGSD-1022 User Manual

Via HTTP
See figure 4-77
• Via HTTP
• Source File Name
Use the Proceed button to upgrade the firmware via TFTP or HHTP that be selected.

4.12.9 Reboot

The Reboot screen (see figure 4-78) resets the device whose configuration is automatically saved before the device is rebooted.
There is a known issue. Sometimes after the "Reboot" button be pressed, it costs lot
Note
:
time to stop the curent tasks. So it might be rebooted after more then 5 minutes.
Figure 4-77 Firmware Upgrade via HTTP
Allows you to upgrade the firmware using your Web browser.
Specifies the file to be downloaded
Figure 4-78 Reboot screen
- 147 –
User's Manual of WGSD-1022/WGSD-8000