Firmware Upgrade - Planet WGSD-1022 User Manual

• Backup
• Source File
Use the Proceed button to save configuration via TFTP or HHTP that be selected.

4.12.8 Firmware Upgrade

The Firmware Upgrade screen contains the following fields:
See figure 4-76
The page contains the following fields:
Via TFTP
• Via TFTP
• File Type
• TFTP Server
• Source File
• Destination File
This is used to backup the configuration to the local hard drive.
Type in the name and path of the file or Browse to locate the upgrade
file.
Figure 4-76 Firmware Upgrade via TFTP
Defines the upgrade through a TFTP Server.
Select file type to be upgraded through a TFTP Server. The possible
field values are :
• Software Image
• Boot Code
The TFTP Server IP Address that contains the source file to upgrade
from.
Specifies the name of the upgrade file on the TFTP Server.
Type in the name and path of the file or Browse to locate the upgrade
file.
- 146 –
User's Manual of WGSD-1022/WGSD-8000