Clear Logging File - Planet WGSD-1022 User Manual

logging file level
no logging file
level — Limits the logging of messages to the buffer to a specified level: emergencies, alerts, critical, errors,
warnings, notifications, informational and debugging.
Default Configuration
The default severity level is errors.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example limits syslog messages sent to the logging file based on the severity level "alerts".
Console (config)# logging file alerts

5.24.8 clear logging file

The clear logging file privileged EXEC command clears messages from the logging file.
Syntax
clear logging file
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example clears messages from the logging file.
Console# clear logging file
Clear Logging File [y/n] y
User's Manual of WGSD-1022/WGSD-8000
- 329 –