Show Rmon Events - Planet WGSD-1022 User Manual

Example
The following example configures an event with the trap index of 10
Console (config)# rmon event 10 log
.

5.19.9 show rmon events

The show rmon events user EXEC command displays the RMON event table.
Syntax
show rmon events
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the RMON event table.
Console# show rmon events
Index Description
--------- -----------------
1 Errors
2 High Broadcast Log-Trap
The following table describes the significant fields shown in the display:
Field Description
Index An index that uniquely identifies the event.
Description A comment describing this event.
Type The type of notification that the device generates about this event. Can have the following
Type Community
-------- -----------------
Log
router
User's Manual of WGSD-1022/WGSD-8000
Owner Last time sent
------------ --------------------
CLI Jan 18 2002 23:58:17
Manager Jan 18 2002 23:59:48
- 285 –