Memory Logs - Planet WGSD-1022 User Manual

There are five items, as below:
• Server
• UDP Port (1-65535)
• Facility
• Description
• Minimum Severity
If you want to add the Server Log configuration to the Server Log Table, use the Add to List button at the bottom of the screen.
When a severity level is selected, all severity level choices above the selection are selected
Note
:
automatically.

4.12.12 Memory Logs

The Memory Log screen (see figure 4-81) contains all system logs in a chronological order that are saved in RAM (Cache), Log
Figure 4-80 Server Logs screen
Specifies the server to which logs can be sent.
Defines the UDP port to which the server logs are sent. The possible
range is 1 to 65535.
The default value is 514.
Defines a user-defined application from which system logs are sent to
the remote server. Only one facility can be assigned to a single
server. If a second facility level is assigned, the first facility is
overridden. All applications defined for a device utilize the same
facility on a server. The possible field values are Local 0 - Local 7.
The field default is Local 7.
Where provides a user-defined server description.
Indicates the Minimum severity from which logs are sent to the server.
For example, if Notice is selected, all logs from a Notice severity and
higher are sent to the remote server.
- 150 –
User's Manual of WGSD-1022/WGSD-8000