Show Ports Security - Planet WGSD-1022 User Manual

console # show bridge multicast filtering 1
Filtering: Enabled
VLAN: 1
Forward-All
Port Static
--------- ------------
e1 Forbidden
e2 Forward
e3 -

5.4.18 show ports security

The show ports security privileged EXEC command displays the port-lock status.
Syntax
show ports security [ethernet interface | port-channel port-channel-number]
interface — A valid Ethernet port.
port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, all classes of entries in the port-lock status are displayed.
console# show ports security
Port status Learning
------- -------- ------------- ----------------- --------- -------- ---------
e1 Disabled Lock
e2 Disabled Lock
e3 Disabled Lock
e4 Disabled Lock
Status
-----------
Filter
Forward(s)
Forward(d)
Action Maximum
- 1
- 1
- 1
- 1
- 182 –
User's Manual of WGSD-1022/WGSD-8000
Trap Frequency
- -
- -
- -
- -