Planet WGSD-1022 User Manual page 99

Aggregate Policer, where user-defined aggregate policers. The Aggregate Policer button opens the New Aggregate Policer
screen.
Aggregate Policer Setting
New Aggregate Policer screen (see figure 4-44):
The page contains the following fields:
• Aggregate Policer
Name
• Ingress Committed
Information Rate
(CIR)
• Ingress Committed
Burst Size (CBS)
• Exceed Action
Figure 4-44 Aggregate Policer Settings screen
Where enter a name in this field.
This defines the CIR in bits per second. This field is only relevant when the Police
value is Single.
This defines the CBS in bytes per second. This field is only relevant when the
Police value is Single.
Action assigned to incoming packets exceeding the CIR.
This field is only relevant when the Police value is Single. Possible values are:
• Drop, which drops packets exceeding the defined CIR value.
• Remark DSCP, where remarks packet's DSCP values exceeding the defined
CIR value.
•
None, forwarding packets exceeding the defined CIR value.
User's Manual of WGSD-1022/WGSD-8000
- 99 –