The page contains the following fields:
• Strict Priority
• WRR
• Queue
• WRR Weight
• % of WRR
Bandwidth
4.8.3 DSCP Settings
The DSCP Settings screen (see figure 4-37) enables mapping DSCP values to specific queues
Figure 4-36 Quere Setting screen
This indicates that traffic scheduling for the selected queue is based strictly on the
queue priority.
This indicates that traffic scheduling for the selected queue is based strictly on the
WRR.
Shows the queue for which the queue settings are displayed.
The possible field range is 1 - 4.
Which displays the WRR weights to queues
Default Rate 1:2:4:8
Displays the amount of bandwidth assigned to the queue.
These values are fixed and are not user- defined.
• 6.67%
• 13.33%
• 26.67%
• 53.33%
User's Manual of WGSD-1022/WGSD-8000
- 91 –