Notification Recipient - Planet WGSD-1022 User Manual

• Filter Type
• Excluded
• Included
Use the
the bottom of the screen.

4.11.7 Notification Recipient

The Notification Recipient screen (see figure 4-66 and 4-67) contains information for defining filters that determine whether traps
are sent to specific users, and the trap type sent.
The page contains the following fields:
• Recipient IP
• Notification Type
• SNMP v1.2
Indicates if informs or traps are sent regarding the OID to the trap recipients.
Restricts sending OID traps or informs
Sends OID traps or informs.
button when you want to add the Notification Filter configuration to the Notification Filter Table at
Figure 4-66 Notification Recipient
Which indicates the IP address to whom the traps are sent.
Defines the notification sent. The possible field values are:
Traps, indicates traps are sent.
Informs, indicates informs are sent.
Enables SNMP v1.2 as the Notification Recipient. Either SNMP v1.2 or SNMPv3
can be enabled at any one time, but not both at the same time. If String and
Notification Version fields are enabled for configuration:
• Community String, where identifies the community string of the trap manager.
• Notification Version, determines the trap type. The possible field values are:
User's Manual of WGSD-1022/WGSD-8000
- 134 –