Security; Acl Binding - Planet WGSD-1022 User Manual

4.7 Security

This section is to control the security access of the switch, includes the user access and management control.
The Security function contains links to the following topics:

• ACL Binding

• RADIUS
• TACACS+
• 802.1x Settings
• Port Security
• Multiple Hosts
• Storm Control
4.7.1 ACL Binding
When an ACL is bound to an interface, all the ACE (Access Control Event) rules that have been defined are applied to the
selected interface. Whenever an ACL is assigned on a port, LAG or, VLAN, flows from that ingress interface that do not match
the ACL are matched to the default rule, which is Drop unmatched packets. You can refer to figure 4-27.
The Page contains the following fields:
• Interface
• ACL Name
Figure 4-27 ACL Binding screen
Indicates the interface to which the ACL is bound. The selection includes:
• Port, indicates port to apply the ACL
• LAG, indicates LAG to apply the ACL
Indicates the ACL which is bound to the interface. The selection includes:
• IP Based ACL
• MAC Based ACL
User's Manual of WGSD-1022/WGSD-8000
- 75 –