Management Acl Commands; Management Access-List - Planet WGSD-1022 User Manual

console — Console terminal line.
telnet — Virtual terminal for remote console access (Telnet).
ssh — Virtual terminal for secured remote console access (SSH).
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays the line configuration.
Console# show line
Console configuration:
Interactive timeout: 20
History: 10
Baudrate: 38400
Databits: 8
Parity: none
Stopbits: 1
Telnet configuration:
Interactive timeout: 10 minutes 10 seconds
History: 10
SSH configuration:
Interactive timeout: 10 minutes 10 seconds
History: 10

5.13 Management ACL Commands

5.13.1 management access-list

The management access-list configuration command defines an access-list for management, and enters the access-list for
User's Manual of WGSD-1022/WGSD-8000
- 242 –