Polling The Ip Address Of The 'Station - Siemens FC7xx Operation Manual

Operation
5
Show information

5.14.2 Polling the IP address of the 'Station'

90 | 184
Building Technologies
Fire Safety
↑ Polling the RT counter
1. Press 'Functions' > 'All functions' in the main menu.
 The 'Select element category' window is open.
2. Select the 'RT control' element category.
 The 'Enter address' window is open.
3. Press <ok> without entering an address.
 A list with all elements of the 'RT' type is open.
4. Select an element and press <softkey 1> 'Execute commands'.
 The 'Select command' window is open.
5. Select the 'Poll RT counter' command.
 The number of remote transmissions is shown.
Displaying the Counter control
The ↑ pre-configuration of the 'Counter control' parts list is country-specific.
1. Press 'Functions' > 'Information' in the main menu.
2. Select that 'Counter control' is displayed.
3. All results for the configured range for 'Counter control' are displayed.
ϖ The 'Station' is networked.
1. Select 'Main menu' > 'Topology' > 'Hardware tree'.
2. Highlight the 'Station'.
3. Press the 'MoreOptions' softkey.
4. Select 'Show details'.
 The IP address is displayed in the 'Network' section.
A6V10211076_i_en_--
2015-12-15