Entry Of Numbers And Letters - Siemens FC7xx Operation Manual

Fire control panel / fire terminal
Table of Contents

Advertisement

4.6 Entry of numbers and letters

Building Technologies
Fire Safety
You can use the keyboard to enter numbers and letters in input dialogs.
Numeric entry
The number of underscores corresponds to the number of possible positions
for the entry.
The overwrite mode is set by default; there is no insert mode.
Horizontal navigation within the input field is possible with the keys <◄> and
<►>.
Use <▲> to delete the character to the left of the cursor position.
Use <ok> to save the entered value and exit the input field.
When there are several input fields in the window, the cursor jumps to the
next field by pressing <ok>.
If the cursor position is in the last or only input field, close the input dialog
by pressing <ok>.
Use <C> to cancel the input and close the dialog without saving.
Alphanumeric entry
Alphanumeric entries are only possible in particular input fields, e.g. for
customer text.
Letters are entered in the same way as letters on telephones. You can select
the corresponding letter by pressing a key several times.
Switching between lower and upper case letters is possible with the key <*>
and only applies for the next character.
In input fields with more than one line, you cannot change back to a line above
the cursor position.
Operation functions
Entry of numbers and letters
A6V10211076_i_en_--
4
37 | 184
2015-12-15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ft724

Table of Contents