Commands With Required Access Levels; Switching On/Off' Command Group - Siemens FC7xx Operation Manual

Commands with required access levels

7

'Switching on/off' command group

7 Commands with required access levels
7.1 'Switching on/off' command group
Command
OFF
OFF/timer
Renovation mode
ON
Non-MCP zones OFF
Non-MCP zones OFF/timer Area, Section
Non-MCP zones ON
MCP zones OFF
MCP zones OFF/timer
MCP zones ON
120 | 184
Building Technologies
Fire Safety
Certain commands that are listed in this chapter can only be executed by the
service technician or someone with access level 3. You will find a description of
these specific commands in document A6V10210416. See chapter 'Applicable
documents'.
See also
1 Access level and access rights [➙ 116]
Element category (short)
Zone
Detect.
RT fire
Alarmg.
Evac gr
UniEvac
Ph.Evac
Alert
Fire ct
OUTFire
Sounder
Printer
Zone
Zone
Zone
Detect.
RT fire
Alarmg.
Evac gr
UniEvac
Ph.Evac
Alert
Fire ct
OUTFire
Sounder
Printer
Area, ↑ Section
Area, Section
Area, Section
Area, Section
Area, Section
Element category (long)
Zone
Detector
RT fire control
Alarming control group
Evac control group
Universal evac control
Phased evac control
Alert sounder
Fire control
Output Fire control
Sounder control
Printer
Zone
Zone
Zone
Detector
RT fire control
Alarming control group
Evac control group
Universal evac control
Phased evac control
Alert sounder
Fire control
Output Fire control
Sounder control
Printer
Area, Section
Area, Section
Area, Section
Area, Section
Area, Section
Area, Section
Access level
2,1
2,1
2,2
2,1
2,1
2,1
2,1
2,1
2,1
2,1
A6V10211076_i_en_--
2015-12-15