Activating / Deactivating Fire Control - Siemens FC7xx Operation Manual

5.13.4 Activating / deactivating fire control

Building Technologies
Fire Safety
Activating a 'Fire control'
1. Select 'Main menu' > 'Functions'.
 The 'Functions' menu is open.
2. Select 'Activate / Deactivate'.
 A list of all element categories on which a command of the 'Activate /
Deactivate' command group can be executed is indicated.
3. Select the 'Output Fire control' element category.
 The 'Enter address' window is open.
4. Press <ok> without entering an address.
 A list with all 'Fire controls' is open.
5. Select an 'Fire control' and press <softkey 1>.
 The 'Select command' window is open.
6. Select 'Activate'.
 'Fire control' is activated.
 The window with the command response is open.
Example for the deactivation of a 'Fire control', in accordance with
the method outlined above:
Functions
Exit with <C>
On / Off
Test
Activate / Deactivate
Information
Function
On/Off
Select 'Activate / Deactivate', continue with <ok>
κ
Selecting element category
↑ Fire control group
Physical channel
Fire control group
Output Fire control
RT channel
Select 'Output Fire control', continue with <ok>
κ
Activation / Deactivation / Reset
(1) Configuration
(2) Maintenance
(3) All functions
(4)
Function
All
(7)
(8)
(9)
Operation
5
Access level 2.1
(5)
(6)
(7)
LED
test
85 | 184
A6V10211076_i_en_--
2015-12-15