Searching For Elements - Siemens FC7xx Operation Manual

5.11.3 Searching for elements

Building Technologies
Fire Safety
An 'Element search' makes it possible to view the details of an element or to enter
commands applicable to an element.
There are two variants for 'Element search':
● Search by category
● Search by 'Address'
Searching for an element
1. Select 'Main menu' > 'Element search'.
 The window to select the search variant is open.
2. Select the search variant and proceed as follows:
● 'Start with category'
First of all, select an element category.
In the 'Enter address' window you have the possibility to enter <ok> without
entering an address. In that case, all elements of this element category are
listed.
When you enter a valid address in the 'Enter address' field, only that element is
listed.
● 'Start with address'
Here you enter a valid address at the beginning. All elements with this address
are listed.
The elements may belong to different element categories such as 'Area' 2,
↑ 'Section' 2, 'Zone' 2, 'Alarming control group' 2 or ↑ 'Fire control group' 2,
after the entry of address 2.
Search by category
The tables below indicate steps of the 'Element search' with 'Start with category':
Main menu
Exit with <C>
Message summary
Functions
Favorites
Topology
Function
On/Off
Select 'Element search', continue with <ok>
κ
Element search
Exit with <C>
Start with category
Start with address
Function
On/Off
Select 'Start with category', continue with <ok>
κ
Selecting elements or events
(1) Element search
(2) Event memory
(3) Login/logout
(4) Settings/administration
Function
All
(1)
(2)
Function
All
Operation
5
Access level 2.1
(5)
(6)
(7)
(8)
LED
test
Access level 2.1
LED
test
71 | 184
A6V10211076_i_en_--
2015-12-15