Auto-Configure Station - Siemens FC7xx Operation Manual

5.17 Auto-configure station

Building Technologies
Fire Safety
With the 'Auto-configure station' function you can commission a newly installed
↑ 'Station' immediately and without any additional settings.
NOTICE
Overwriting an existing configuration
An existing customer-specific configuration is lost.
● First save an existing customer-specific configuration.
The 'Auto-configure station' process takes a few minutes, depending on the ↑ site
size.
1. Select 'Main menu' > 'Topology'.
 The 'Topology' menu is open.
2. Select 'Hardware tree'.
 A list with all 'Stations' is displayed.
3. Select a 'Station'.
4. Press 'More options'.
 The 'Select option' window is open.
5. Select 'Auto-configure station'.
 ↑ 'Station' is auto-configured.
Operation
Auto-configure station
93 | 184
A6V10211076_i_en_--
2015-12-15
5