Standby Visibility; Expanded Visibility - Siemens FC7xx Operation Manual

6.9.1 Standby visibility

6.9.2 Expanded visibility

Building Technologies
Fire Safety
The ↑ 'Station' with the 'PMI standby visibility' configuration monitors one or more
other 'Stations', or a ↑ management station in the configured ↑ visibility.
● When the fire detection installation is in normal operating condition, 'PMI
standby visibility' is deactivated. The 'Station' configured in this way and the
display are then in quiescent condition.
● If a monitored 'Station' fails or if the connection to a monitored 'Station' is
interrupted, the configured 'PMI standby visibility' becomes active and the fire
detection installation can be operated in the configured visibility via this 'Station'
exactly as was previously the case with the failed 'Station'.
In addition to 'PMI standby visibility', 'PMI expanded visibility' can also be
configured for a ↑ 'Station'.
See also
1 Deactivating standby [➙ 60]
1 Expanded visibility [➙ 119]
If configured, you can use a command to activate 'PMI expanded visibility' for a
↑ 'Station' and this gives you the configured ↑ visibility.
For a 'Station' with 'PMI standby visibility', 'PMI expanded visibility' can also be
configured.
The 'PMI expanded visibility' configuration is however also available regardless of
'PMI standby visibility'.
The 'PMI expanded visibility' function can be configured with dependencies.
Possible dependencies
● 'PMI expanded visibility' can only be activated if a monitored 'Station' fails.
See also
1 Activating / deactivating expanded visibility [➙ 61]
System functions
6
Visibility
119 | 184
A6V10211076_i_en_--
2015-12-15