System description
9
Control
9.5.2 Evacuation control
150 | 184
Building Technologies
Fire Safety
'Evac control' makes it possible to configure a complete evacuation function for
each ↑ alarm device zone, e.g., on one floor.
Two function blocks are available for each control:
●
'Alert'
–
The assigning of all conditions, so that the corresponding alarm devices
transmit a warning signal.
●
'Evac'
–
The assigning of all conditions, so that the corresponding alarm devices
transmit an evacuation signal.
Figure 23: Information flow for evacuation control
D
↑ 'Detection tree'
C
↑ 'Control tree'
a
'Evac control group'
f
'Evac control'
HW
Hardware
In 'Evac control group' two different controls are possible:
●
'Universal evac control' ('Evac')
●
'Phased evac control' ('Alert' / 'Evac')
Events from ↑ 'Station', ↑ detector line, ↑ 'Section', or 'Zone' (cause) trigger an
'Evac control'.
A6V10211076_i_en_--
2015-12-15