Key Switch (Optional); Standard Keys - Siemens FC7xx Operation Manual

Setup of the Person Machine Interface
3
PMI
3.1.1.1 Functions on the EVAC PMI
LED
a Totaal alarm
b Bedrijf
c Uitgeschakeld
d Storing
e
EVAC zone
selection
f Fault/Isolation
g Alarm

3.1.2 Key switch (optional)

3.1.3 Standard keys

22 | 184
Building Technologies
Fire Safety
Button
1 Totaal alarm
2 Zoemer uit
3 Start
4 Stop
5 IN/UIT
6 LED TEST
7 Selecteer
Function
Indicates that 'Overall Alarm' has been activated
Active as long as power supply is available
Active when at minimum one EVAC zone is switched off
● Active when at least one fault is present in an EVAC zone
● Active (flashing) when the connection to the fire control panel is faulty
Active when the zone has been selected
Active when an EVAC zone has been switched off or a fault is present
Active when all EVAC zones are activated
You can use the key switch to release an access level. The accessible access
level is configurable.
The key switch has 2 positions:
● On (horizontal position)
● Off (vertical position)
See also
1 Logout timeout [➙ 118]
With the standard buttons, functions can be performed at the push of a button.
<Silence buzzer>
Switches the 'Station' buzzer off.
<Acknowledge>
● Acknowledges all events that can be acknowledged.
● Confirms presence (↑ 'AVC', 'IC')
● Switches the buzzer off
Function
Pressing the button selects all EVAC zones
Silences the buzzer of the EVAC PMI
Activates selected EVAC zones
Deactivates selected EVAC zones
Switches selected EVAC zones on or off
Activates the LED test on the EVAC PMI
Selects an EVAC zone for the issuing of
additional commands (Start, Stop, ON/OFF)
A6V10211076_i_en_--
2015-12-15