Table of Contents
Advertisement
Parameter assignment of a Mobile Client
4.9 Configuring network operation
4.9.3
Specifying the IP address and name server
You can use this function to address the HMI device in the local network.
Requirement
● You have opened the following window with the "Network and Dial-up Connections" icon:
● Your system administrator has provided the necessary information for the setting.
Procedure
1. Touch the "PN_X1" icon.
The following dialog appears:
2. If you need automatic address assignment, select the "Obtain an IP address ..." option
button.
3. If you need manual address assignment, select the "Specify an IP address" radio button.
4. If you have selected manual address assignment, enter the corresponding addresses in
the "IP Address," "Subnet Mask" text boxes and if necessary in "Default Gateway".
84
NOTICE
IP address must be unique
An address conflict will occur and there may be malfunctions if more than one device is
assigned the same IP address in the local network.
Assign a unique IP address to each HMI device in the local network.
Operating Instructions, 07/2015, A5E36360099-AA
Mobile Client900RXA
Advertisement
Table of Contents
