Siemens FC7xx Operation Manual page 88

Operation
5
Activation / Deactivation / Reset
88 | 184
Building Technologies
Fire Safety
Due to the fact that in this example only one 'Evac control' has been configured,
there is no selection window for selecting 'Evac control' after confirmation with
<ok> without address entry.
Select command
Activate/ALERT+EVAC
Activate/EVAC
Activate/ALERT
Deactivate
Select 'Activate/EVAC' command continue with <ok>
κ
 Command response
Execute command
Activate/EVAC
Command executed
(1)
(2)
(3)
(4)
A6V10211076_i_en_--
2015-12-15