100i / 200i / 300i / 400i
3. The Arc Starter must be grounded; the grounding terminal is marked
details.
4. Use a clamp to secure the Torch Lead Shield braid brass ring to the port on the Remote Arc Starter as shown.
Connect Control Cable
1. Connect the Remote Arc Starter cable to the Remote Arc Starter receptacle.
72
1 Nut and 1 Washer
Remain in Place
Art # A-04759
Shield Clamp
Coolant and Pilot Leads
to Torch Valve Assembly
INSTALLATION
. Refer to the previous section for grounding
Art # A-04758
Torch Leads
Ground Cable
Torch Leads Shield
Manual PN: 0560956430