Device Output Configuration; Pv Range Values - Emerson Rosemount Reference Manual

Reference Manual
00809-0100-4021, Rev GC
Resetting Active Sensor Drift Alerts: Fast Keys 1-1-1
1.
2.
3.
3.8

Device output configuration

Device output configuration contains PV range values, alarm and saturation, HART output, and
LCD display options.
3.8.1

PV range values

HART 5 Fast Keys
HART 7 Fast Keys
Field communicator
The PV URV and PV LRV commands, found in the PV Range Values menu screen, allow the user to
set the transmitter's lower and upper range values using limits of expected readings. See
A-1 on page 196
the Lower Range Value (LRV) and Upper Range Value (URV). The transmitter range values may
be reset as often as necessary to reflect changing process conditions. From the PV Range Values
screen select 1 PV LRV to change the lower range value and 2 PV URV to change the upper range
value.
HART® commissioning
Select 1 Overview.
Select 1 Device Status: (Maintenance or Failed).
Select 1 Refresh Alerts.
2, 2, 5, 5
2, 2, 5, 5
for unit and range setting limits. The range of expected readings is defined by
Section 3: HART commissioning
April 2014
Table
91