Smart Wireless Gateway; Default Settings; Device Sensor Configuration - Emerson Rosemount 648 Reference Manual

Configuration
July 2016
2.4.3

Smart Wireless Gateway

The Rosemount 648 Wireless supports limited remote configuration through the Smart
Wireless Gateway. The Gateway allows configuration of the following device parameters:
HART Tag, Short Tag, Descriptor, Engineering Units, Update Rate and Range Values.
2.4.4

Default settings

The Rosemount 648 Wireless default configuration is shown below:
Sensor type
Engineering units
Number of lead wires
Network ID
Join Key
Update Rate
Note
The C1 option code can be used to enable factory configuration of the Update Rate, Date,
Descriptor and Message fields. This code is not required to have the factory configure the
Sensor Type, Connection or the Self Organizing Network parameters.
2.4.5

Device sensor configuration

Every temperature sensor has unique characteristics. In order to ensure the most accurate
measurement, the Rosemount 648 Wireless should be configured to match the specific
sensor that it will be connected to. Prior to installation, verify the configuration and
connection settings of the temperature sensor through a Field Communicator or AMS
Device Manager.
10
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Pt 100 ( =0.00385)
°C
4
Factory generated network parameters
Factory generated network parameters
1 minute
Reference Manual
00809-0200-4648, Rev BB
Configuration