Section 3: HART commissioning
April 2014
11.
12.
Disable Thermocouple Degradation in Manual Setup: Fast Keys 2-2-4-3-4
1.
2.
3.
108
Decide if you would like to reset the baseline resistance of the thermocouple you are
configuring. If so, choose 1 Yes. If not, choose 2 No. Return to Main Screen.
IF YES: Review the summary provided on the communicator and press OK when
satisfied or ABORT to exit.
From the Home Screen, select 2 Configure.
Select 2 Manual Setup.
Select 4 Diagnostics.
Reference Manual
00809-0100-4021, Rev GC
HART® commissioning