Reference Manual
00809-0100-4021, Rev GC
Disable Hot Backup in guided setup: Fast Keys 2-1-5
1.
2.
3.
4.
5.
HART® commissioning
From the Home Screen, choose 2 Configure.
Choose 1 Guided Setup.
Choose 5 Config Hot Backup.
When prompted, choose 1 Yes to disable Hot Backup. To reconfigure Hot Backup,
choose 2 No.
When prompted, choose which variable you would like as your primary variable (PV)
and press ENTER. With Hot Backup disabled, the PV may be Sensor 1 Temperature,
Sensor 2 Temperature, Differential Temperature, Average Temperature, or First Good
Temperature.
Section 3: HART commissioning
April 2014
47