Emerson Rosemount Reference Manual page 66

Section 3: HART commissioning
April 2014
After the sensor has been repaired or replaced, the Faceplate window in DeltaV will display boxes
next to each alarm that has been addressed. You must acknowledge each alarm to clear it by
checking the ACK box to the left of the alarm.
It is recommended Hot Backup be reset immediately after repairing or replacing the affected
sensor. See
DeltaV Faceplate window indicates the alarms ADVISE Configuration Change and MAINTENANCE
Hot Backup Active. You must acknowledge these alarms in order to clear them by checking the
ACK boxes next to each alarm.
56
"Reset Hot Backup: Fast Keys 2-2-4-1-4" on page
Reference Manual
00809-0100-4021, Rev GC
78. After resetting Hot Backup, the
HART® commissioning