Emerson Rosemount Reference Manual page 119

Reference Manual
00809-0100-4021, Rev GC
4.
5.
6.
7.
8.
HART® commissioning
Select 3 Sensor and Process Diagnostics.
Select 4 Config TC Diagnostic.
Select the sensor for which Thermocouple Diagnostic will be disabled. Choose from 1
Sensor 1 or 2 Sensor 2 and press ENTER.
Select 2 Disable to disable Thermocouple Diagnostic and press ENTER.
Thermocouple Degradation has been disabled for the selected sensor. Press OK.
Section 3: HART commissioning
April 2014
109