Drilling Pattern And Installation Example - Beckhoff AX8000 System Manual

Mechanical Installation
8.2

Drilling pattern and installation example

Before you start with the installation, make the threaded holes in the mounting plate according to the
universal drilling pattern for screwing on the AX8000 multi-axis servo system.
Generic drilling template
30 30 30 30 30
M5 M5 M5 M5 M5
M5 M5 M5 M5
15 30 30 30 30
If you equip the mounting plate with the universal
drilling pattern, you can change the configuration of
the multi-axis system at any time without having to
redrill all of the holes.
Procedure:
• Loosely screw in the three flat-head screws (M5 x 5) (1 and 2).
• Hang the AX8620 supply module on the flat-head screw (2) and gently push it against the mounting
plate. The upper screw heads should slip through the rectangular openings into the mounting holes.
• Tighten the three flat-head screws (1 and 2) with a torque of 3 Nm.
Mounting further modules:
• For all relevant modules, push the AX bridge (3) into the right end position.
• Loosely screw in the three flat-head screws (M5x5) (4 and 5).
• Hang the AX8206 axis module on the flat-head screw (5) and gently push it against the mounting plate.
The upper screw heads should slip through the rectangular openings into the mounting holes.
• The detail (6) shows the integrated mounting aid. Ensure that the bar is flush with the cutout and the
rear panels do not overlap.
• Tighten the three flat-head screws (4 and 5) with a torque of 3 Nm.
• Now open the quick release couplings (7) and push the AX Bridge (3) to the left end position for all
relevant modules. Close the quick release couplings (7) again.
40
All manuals and user guides at all-guides.com
30 30 30 30
M5 M5 M5 M5
M5 M5 M5 M5
30 30 30 30 15
Version: 1.0
6
1 4
AX8620 AX8206
X04
X05
7
+24V DC
GND 7
7
+DC
3
-DC
7
7
7
2 5
AX8000 - system manual
AX8108
7
7
3
7
7
7